The best way I have found to clean chrome or
stainless steel is by using the method I used when I was in the Army for
cleaning up the metalwork on our dress uniforms. Coat the metal in Brasso
(you can buy it or nick it from Woolworths 2 & 3 ha'peths a tin), when dry
sprinkle on some ordinary washing powder, leave for a few minutes then very
gently with an old toothbrush carefully clean the metalwork with a lttle warm
water so the washing powder becomes a paste. This has got me out of many
of ten o'clock staff parades when I was a bad lad in the Army!
Regards
Dave
60 LeBaron
-----Original Message----- From:
A. Foster <monkeypuzzle1@xxxxxxx> To:
mailing-list@xxxxxxxxxxxxxxxx
<mailing-list@xxxxxxxxxxxxxxxx> Date:
14 April 2002 14:43 Subject: Re: IML: Cleaning
Chrome
Hello;
I would try either chrome polish or brasso,
which ever is handier. If it's really grungy then the #0000 steel wool would
likely work well as furniture refinishers use it to rub out old finishes to
clean them up and chrome is a lot harder to destroy then varnish. I just use
an S.O.S pad on bicycle rims an handle bars but I am not putting them up for
show.
Best Regards
Arran Foster
1954 Imperial Newport
Needing A Left Side Taillight Bezel And Other Trim
Parts
|