68 turn signal switch

["robert hanekamp" <bobsmopar@xxxxxxxxxxxxxx>]

Hi Bill.

What steering column do you have.

If you have the none tilt Saginaw column I have one that I could take the chrome turn signal lever off of.

If it is this one the switch is cheaper and not as hard to put in.

If it is the tilt-a-scope it is not so fun to put in.

You have to pry out the old one and start the new one in with long steel arm first and very carefully take a screw driver and pry it back in.

The switch for these are around $140.00 to $200.00.

I know Frank Mitchell has them I got mine on e-bay.

You might be able to go thru your Chrysler dealer to.

If 67,s are the same here is some part numbers.

turn signal switch w/o tilt 2880829

turn signal switch w/ tilt   2925506

I got these numbers out of my 68 parts sheets.

Hope this helps.

Bob

----- Original Message -----

From: William Conway

To: mailing-list@xxxxxxxxxxxxxxxx

Sent: Friday, March 22, 2002 9:43 AM

Subject: IML: 68 turn signal switch

have a 67 4 dr sedan with turn signal out, is replacing same as described for 68?  also need signal switch arm if anyone knows where to find one.  great club for imperial information.

Thank you,  Bill