re: exhaust manifold
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

re: exhaust manifold



Can't these be welded as well?  Cast iron is not easy to weld, but I would 
think that its possible, and it may be cheaper.  Any suggestions?

D^2

Quoting JOEHOLSOM@xxxxxxx:

> My 65 convertible has developed an exhaust leak. I thought I would be
> able to 
> get by cheaply and replace the gasket between the manifold and the
> exhaust 
> pipe. No such luck, it helped but I find that I am in need of a left
> side 
> exhaust manifold  for the 413. It appears to have a few small holes in
> the 
> top side close to the bolt area, but the leak is in the cast iron not
> around 
> the flanges. If any one has a set of exhaust manifolds they would be
> willing 
> to part with reasonably please let me know. The reason for the set is
> that 
> the heat riser is also leaking on the right one. I might as well change
> both 
> and get it over with. Thanks,
> Joe 64 coupe& 65 vert
> 
> 


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.