----- Original Message -----
Sent: Friday, June 08, 2007 6:41 AM
Subject: IML: 59 fuel gauge problem
My fuel gauge was going all
the way to full, so I had my extra sending unit rebuilt. Got it back put it in
and it still reads full. Disconnect the sending unit gauge goes to empty, no
in between. Tested original sending unit and it gives the same resistance as
the rebuilt one 20oms to 213 oms. Checked the volts at the tank end of the
wire 12.2v. Still reads full or empty when disconnected. Anyone have an issue
like this? I'm going to try hooking up a wire from the back of the gauge to
the sending unit to rule out if it is the wire or not. Any other suggestions.
Thanks in advance,
Marty Trendler
59 Imperial LeBaron
Sedan