Re: IML: 60 fuel sender unit
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IML: 60 fuel sender unit



Well, I got my rebuilt fuel sender for my 60 Crown back last night and I just got finished installing it. Prior to the rebuild, my fuel gauge remained on E at all times. The oil pressure gauge worked as did the temperature and ammeter gauges. Now, after installing the rebuilt fuel sender, the fuel gauge registers FULL even though I know there is only 3 gallons in the tank, the temp gauge pegged at H as did the oil pressure gauge. Anybody have any ideas what happened?
Thanx
Tom
60 4dr Crown Southampton.

-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.