Re: IML: Flattened exhaust pipe stock?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IML: Flattened exhaust pipe stock?



From: "Chris Strohmeyer" <chrisstroh@xxxxxxxxxxx>
Subject: IML: Flattened exhaust pipe stock?

On my 67 as the exhaust pipe heads over the rear axle and downward behind
the rear passenger wheel the pipe is mashed to what seems to be about half
of it's diameter for about 6 inches. The mash almost looks like a machine
did it but what I want to know is does other 67's have this squished part?

Thx again..I love this forum,
Chris
67 Imperial Convertible

The machine that bends the pipe leaves the squish - the greater the bend, the more squish, the better the machine, the less squish per degree of bend...
       -Kle.
'69 Crown 4DHT



-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.