RE: IML: Flattened exhaust pipe stock?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: IML: Flattened exhaust pipe stock?



Yes they have a squished part where the bend is.


> [Original Message]
> From: Chris Strohmeyer <chrisstroh@xxxxxxxxxxx>
> To: <mailing-list@xxxxxxxxxxxxxxxx>
> Date: 1/13/2007 9:30:05 PM
> Subject: IML: Flattened exhaust pipe stock?
>
> On my 67 as the exhaust pipe heads over the rear axle and downward behind 
> the rear passenger wheel the pipe is mashed to what seems to be about
half 
> of it's diameter for about 6 inches. The mash almost looks like a machine 
> did it but what I want to know is does other 67's have this squished part?
>
> Thx again..I love this forum,
> Chris
> 67 Imperial Convertible 
>
>
>
> -----------------  http://www.imperialclub.com  -----------------
> This message was sent to you by the Imperial Mailing List. Please 
> reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
> shared with everyone. Private messages (and attachments) for the
> Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
> To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
>




-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.