You will get them here.
http://www.calipersonline.com/index.asp?PageAction=VIEWPROD&ProdID=36
There called Calipers Online.
Chris
67 Imperial convertible
----- Original Message -----
Sent: Friday, December 15, 2006 1:25
PM
Subject: Re: IML: Brake cllipers
I tried on-line again today to buy these calipers. When you go to "check
out" the number of calipers you order changes to 0 and then it says the parts
are not available.
-----
Original Message ----- From: "MIKE CINDY BECKER"
To: mailing-list@xxxxxxxxxxxxxxxx Subject:
Re: IML: Brake cllipers Date: Fri, 15 Dec 2006 12:58:41 -0800
About 3 weeks ago. mike
----- Original Message -----
Sent: Friday, December 15, 2006 8:31
AM
Subject: Re: IML: Brake
cllipers
When did you do this?
Chris
----- Original Message -----
Sent: Friday, December 15, 2006
5:35 AM
Subject: Re: IML: Brake
cllipers
Yes, autozone told me the same thing, but when I went down to the
store, to order and pay for them they told me they just had
a listing , but were not really available. mike becker
----- Original Message -----
Sent: Thursday, December 14, 2006
8:55 AM
Subject: IML: Brake
cllipers
For some reason, the local AutoZone says he can get 68-69 Bud,4
piston calipers Loaded,(with pads) for $66.99,ea. plus core of $14.00
ea. Part no. P4031, supplied by Morse.(I think he said that was the
pair part no.) Call and see. Dave.
--------------
Original message -------------- From: "Chris Strohmeyer"
<chrisstroh@xxxxxxxxxxx>
I'm having the same problem finding the left
side caliper. Will Cardone rebuild mine without ripping me off?
Goldline will rebuild you calipers in PAIRS only, for $350.
EACH!
Chris
----- Original Message -----
Sent: Thursday, December 14,
2006 6:01 AM
Subject: Re: IML: tail
lights
Thanks,
Am going thru the brakes and converting them to dot 5
(silicone fluid). I am replacing all components at this time as
that is the only way to changeover to the dot 5 without
problems, have been able to find all components except
calipers . I got the hoses from carquest, the rear shoes from
carquest, the master cylinder from (new) from raybestos, but
the calipers (which I have bought before with no problem) where
either not listed or not available from every auto parts store I
called. I went on line and found them at rockauto but only for the
r/h side, they gave me the number for a1cardone, called them and
they said they did not have any cores for the left side, thus no
rebuilds. the front pads gave me fits untill I
called C>H>Topper in california and he told me that corvette
d8 or d9 pads are similar and he could make me up a set for 28.00
bucks so I have everything I need except a left hand caliper, I
got a budd caliper rebuild kit (New old stock) from ebay, but
I cannot get one of the pucks out of the the caliper without
destoying the puck I am afraid. Does anybody have an EXTRA brake
puck that they can part with ? so I can get this together. thanks,
mike Ps I will be posting more detailed part numbers and
sources for the brake parts , maybe they can be added to the 67-68
part of the website ----- Original Message -----
Sent: Wednesday, December
13, 2006 4:29 PM
Subject: RE: IML: tail
lights
As Chris correctly
pointed out, you don't want a mirror type reflection - the right
surface is a frosty appearance such as you would get from spray
aluminum paint.
Actually, in the
case of all 3 of the 67-68s I've owned, just taking the fixture
apart and carefully cleaning and polishing the lens and
reflector has rewarded me with brand new looking tail lights,
which are very bright and clear looking - you couldn't hope for
anything better.
Dick
Benjamin
From:
mailing-list-owner@xxxxxxxxxxxxxxxx
[mailto:mailing-list-owner@xxxxxxxxxxxxxxxx] On Behalf Of
Crestonave@xxxxxxx Sent: Wednesday, December
13, 2006 9:57 AM To:
mailing-list@xxxxxxxxxxxxxxxx Subject: Re: IML: tail
lights
Can
someone explain what "vacuum chromed"
is?
Also
re the reflectors and spray paint, what about if you got some of
those mirror tiles and glued them behind the
bulbs?
68 Imp
convert and 60 NYer
coupe Fred Joslin
|