-------------- Original message --------------
From: "Andrew A." <canafornia@xxxxxxxxxxxx>
great thanks!..I figured it was about normal as all cylinders are within 5PSI of each other and the motor runs smooth as silk but I just figured I would check with those "in the know".....What needs to be done to raise the compresion to the level of the high perf. 440's?..is it just the heads that are different or are the pistons also different from my 1975 as compared to the late 60's 440's?....Also how much more power should that give me?...----- Original Message -----From: DR CHALLENGERSent: Tuesday, November 28, 2006 12:14 AMSubject: Re: IML: 440 compression??compession ratio was rated a 8.2 to 1, but its more like 7.7 or so. 125 PSI
sounds normal.
.
>From: "Andrew A." <canafornia@xxxxxxxxxxxx>
>>Just wondering if anyone knows off hand what the normal good cylinder
>>compression PSI is for a 1975 440?...Usually I'm used to V8's being in the
>>145-160 range, but all my cylinders in my 1975 440 are between 122-128..I
>>understand that these are low compression engines but have no idea what is
>>considered "low compression"...Is that normal for these engines?
>
----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with ev eryone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm