---- Elijah Scott <imperial1971@xxxxxxxxx> wrote: > howard <parkerc@xxxxxxxxxxxxxx> wrote: Can anyone please tell me how to get the ignition switch out of my 65 Lebaron. > Chad -- I haven't had a chance to go out to the garage and look at my own '65 LeBaron, but I believe that you remove the ignition switch by first unscrewing the lock ring around it. On the front of the ignition switch, do you see a ring around the edge of it that has notches in it? If so, use a large screwdriver or a small putty knife to hook into the notches and turn it counterclockwise to unscrew it. Once you unscrew this ring, the ignition switch will pull forward to be removed. > > Once it's out, you may be able to remove the broken key, or any good locksmith should be able to remove it and cut you a new one. > > Good luck! > > Elijah > > > Imperial Power Window Switch Repair > > Find Repair & Shop Manuals, Parts Books, History & More at The Imperial Bookshelf! > > My Collection of Imperials > 1965 Imperial LeBaron > 1967 Chrysler Newport Custom Sedan > 1970 Imperial LeBaron > 1971 Imperial LeBaron > Don"t see how you can pull it forward with the ring off. You have to push it back and reach up under the dash to remove it. > > > > --------------------------------- > Sponsored Link > > Talk more and pay less. Vonage can save you up to $300 a year on your phone bill. Sign up now. ----------------- http://www.imperialclub.com ----------------- This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm