I'll check mine too. It would not have occurred to me to look there, so thanks to Robert and Dick and the IML on that one! -K --- grandcar <grandcar@xxxxxxxxxxxx> wrote: > Jim: > > I had a similar problem with a 1954. It was a loose > connection inside > the turn signal switch. Sometimes the brake lights > would work fine, > sometimes only one would work and sometimes none. I > found if I held > the turn signal lever in a certain position when > stopping, they would > both work. We took the horn ring assembly off and > repaired what had > come loose which ended the problem. You might see > if leaving the > turn signal lever slightly up or down makes a > difference, or if moving > it around a little changes things. This would > indicate that is where the > problem is. I hope this helps. > > Robert Kenyon Wills ----------------- http://www.imperialclub.com ----------------- This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm