Get a pair of long nosed pliers & CAREFULLY squeeze the forks a little bit.
The buttons will then fit snuggly.
John
----- Original Message -----
From:
To:
Sent: Monday, October 17, 2005 6:44 PM
Subject: Re: IML: '60 push buttons falling out!
> If you are very careful, you should be able to combine all of the best
> parts to make pretty, and usable push buttons. If not, hang in there, I am
> sure a good set will turn up. I haven't ever taken the chrome off the push
> buttons, but if it was assembled once, it should be able to be
> disassembled and reassembled now. I would recommend trying to put the nice
> chrome on the good plastic. But don't force anything.
>
> Paul W.
>
> In an email dated 18/10/2005 1:55:13 am GMT Daylight time, richard burgess
>writes:
>
>>Another question.......My R and N push buttons keep falling out! The
>>notches are worn at the back in the plastic. Now I have plenty of good
>>usable spares but all have nasty worn chrome and bad fronts. Any way to
>>repair my pretty ones?
>>
>>Richard Burgess
>>'60 LeBaron
>>'60 Crown
>>
>>
>>
>>
>>---------------------------------
>> Yahoo! Music Unlimited - Access over 1 million songs. Try it free.
>>
>
>
> ----------------- http://www.imperialclub.com -----------------
> This message was sent to you by the Imperial Mailing List. Please
> reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
> shared with everyone. Private messages (and attachments) for the
> Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
> To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
>
>
----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm