Re: IML: Repairing emblems

[John Meyer <donkiyoti@xxxxxxxxxxxxx>]

I don't know for sure if this will work but.....

I have a busted dealer emblem and I showed it to the chrome shop. They 
said it could be repaired by brazing. Of course then it would need to 
be replated.

John
1965 Crown
Tucson
On Sep 23, 2005, at 7:28 AM, Ron M wrote:

> What is the best way to repair the script emblems on both my 50 
> Windsor and 68 Imperial?  On the Windsor one of the "Windsor" emblems 
> is broken so the "r" hangs down.  On the Imperial the emblem is fine 
> but the pegs on the back that attach it to the car are either broken 
> or corroded off.
> Will an epoxy such as JB Weld work or is it better to solder them?  
> All opinions and suggestions are greatly appreciated.
>
> Thanks,
>
> Ron
>
> 68 Imperial Convertable
> 50 Windsor Sedan
>
> --
> There are no stupid questions, just a lot of
> very curious idiots.
>
>
>
>
> -----------------  http://www.imperialclub.com  -----------------
> This message was sent to you by the Imperial Mailing List. Please 
> reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
> shared with everyone. Private messages (and attachments) for the
> Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
> To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm



-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm