RE: IML: 90 IMP key Ingition
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: IML: 90 IMP key Ingition



Thanks Mark     will look on Monday, my bud is on his way over with his dolly to get her home. with my luck it will get towed. some junker can sit on the side for 2 weeks, just let a nice looking car sit and off it goes for high fees

Can't wait to see how my trip from Allentown goes next Sat. with my latest toy (75Imp)

Alan Jordan

-------------- Original message from "Mark Swingle" <mark.swingle@xxxxxxxxxxx>: --------------

Call Napa or the like.  I?m sure Napa or someplace similar was where I got a set of the tamper proof Torx bits.

Mark

90 Imperial

 


From: mailing-list-owner@xxxxxxxxxxxxxxxx [mailto:mailing-list-owner@xxxxxxxxxxxxxxxx] On Behalf Of alan1416@xxxxxxx
Sent: Sunday, August 28, 2005 6:22 PM
To: mailing-list@xxxxxxxxxxxxxxxx
Subject: Re: IML: 90 IMP key Ingition

 

Hello Brad

         Thanks for the fast help, as Merial is sitting on the side of the road all alone.  I'm hopping it is just the key switch. did yours go nuts when it broke. i have never had a car i could not shut off. as in the key would not turn to the off position. I have the cover off but the screw are Torx non-tamper. the one with the hole in the end of the bit. were can i get them. I sure don't have the cash to have her towed to the dealer. if it is just the switch it looks pretty ez to change.

 

Alan

-------------- Original message from Brad Hogg <luxoliner@xxxxxxx>: --------------


> Those ignition switch assemblies can be troublesome. They are readily
> available at your jobber parts store. About $50 for the one I bought. You
> can change out the lock tumbler so your OEM key will still work. Read the
> directions and don't force it and break something (like I did). Once you
> get the hang of it, they are easy to take apart and reassemble.
>
> ----- Original Message -----
> From:
> To:
> Sent: Sunday, August 28, 2005 4:19 PM
> Subject: IML: 90 IMP key Ingition
>
>
> Help never seen this befor. was driving today in my 90 IMP, and the Elec
> system (IE.AC windows, radio, turn-signals all stopped working. them warning
> lights on dash come on ( IE airbag, ABS brake and so on) then the warning in
> the overhead console starts sayen crazy stuff like my turn-signal is on, and
> the key is in the ignition. so i figger i better stop and see what's up.
> well here the kick in the rubber parts, I can't shut the car off, the key
> will not turn back(off) just forward to engage starter. and as i sit there
> she starts to over heat, as the fans are not running. I finely pulled the
> coil wire to kill the motor. I'm hopping it the ignition key in the column
> and some wires in it have went south. It use to get very hot on the bottom
> just behind the wheel. How's got some ideas,
>
>
>
> ----------------- http://www.imperialclub.com -----------------
> This message was sent to you by the Imperial Mailing List. Please
> reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
> shared with everyone. Private messages (and attachments) for the
> Administrat ors should be sent to webmaster@imperial club.com
> To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
>



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.