Re: IML: the hot starting problem,,,,,,again!!!!

["jsadowski" <jsadowski@xxxxxxx>]

If it doesn't have one of these, make one up out of ordinary foil & a piece 
of fiberglass which you can get at the Home Depot.
John
----- Original Message ----- 
From: "Ken W Stephenson" <kss37215@xxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Thursday, May 19, 2005 5:28 PM
Subject: Re: IML: the hot starting problem,,,,,,again!!!!


> Excellent suggestion!  That foil backed fiber glass should never be
> removed!
> Ken
> On Thu, 19 May 2005 17:04:45 -0700 (PDT) Rob Goodyear
> <rob1964cc@xxxxxxxxx> writes:
> > I wonder if the hot starting problem occurs after the
> > odd factory installed insulation is removed from the
> > intake manifold area.  The lack of this added
> > installation would allow the gas in the carb area to
> > overheat(?)  Just a theory.  Any thoughts?
> >
> > Rob Goodyear
> > 1964 Crown Coupe
> > 1/2 1964 Crown 4-dr
> > rob1964cc@xxxxxxxxx
> >
> >
> >
> > __________________________________




-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm