RE: IML: 82 Imperial Fuel Injection

["Dick Benjamin" <dickb@xxxxxxxxx>]

If you study the parts, you'll see they only go together one way to make
sense.

Dick Benjamin

-----Original Message-----
From: mailing-list-owner@xxxxxxxxxxxxxxxx
[mailto:mailing-list-owner@xxxxxxxxxxxxxxxx] On Behalf Of Ken W Stephenson
Sent: Saturday, April 30, 2005 4:24 PM
To: mailing-list@xxxxxxxxxxxxxxxx
Subject: Re: IML: 82 Imperial Fuel Injection

Thanks, Dick,
One question.  It surely must make a difference which pressure valve
(high or low) is in which channel to the nozzle assemblies, as they are
not the same design.  Not clear which is which from the manual drawings. 

Thanks again, Ken  


-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm

---
[This E-mail scanned for viruses by Declude Virus]




---
[This E-mail scanned for viruses by Declude Virus]



-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm