RE: IML: Starter in a '66 Coupe
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: IML: Starter in a '66 Coupe



 

-----Original Message-----
From: mailing-list-owner@xxxxxxxxxxxxxxxx
[mailto:mailing-list-owner@xxxxxxxxxxxxxxxx] On Behalf Of Kenyon Wills
Sent: Saturday, April 23, 2005 7:21 PM
To: mailing-list@xxxxxxxxxxxxxxxx
Subject: Re: IML: Starter in a '66 Coupe

<snip>
Isn't the ring gear that the starter motor engages in welded into the torque
convertor?  I can't remember.
<snip>

Yep, as far as I know, Kenyon, on most Mopar V-8s it's welded to the outer
circumference of the converter, not the flex plate.

Bill




-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.