IML: Question on Center Planes

[JCantor791@xxxxxxx]

My brake overhaul project on our '56 Sedan has reached the point of removing 
the front wheel cylinders and I've run into a small challenge.  The center 
planes on both sides are in poor condition.  One of the adjuster cams on each is 
seized and two of the four bolts that attach the center plane to the spindle 
refuse to come out.

I have a copy of the FSM but it only talks about disassembly to this point 
and does not appear to cover repair of the center planes themselves.  Are they 
serviceable or must they be replace as an assembly?  Anyone have suggestions as 
to a) how to repair them myself, b) who to go to have them repaired, or c) 
where to buy 'new' ones?

Thanks,
Jeff
'56 Sedan
Trenton, NJ


-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm