I took a trip over to the Depot today at lunch and bought a few nylon bushings to replace the pulverized ones in my driver's window motor, and a fresh can of lithium grease. The 1/2" diameter by 1/4" height bushings looked a little short, but I bought a few of them as well as a few of the 1/2" x 1/2" and went back to work. Tonight it took some effort to get the new bushings installed. Is there supposed to be any play once the bushings are installed in the larger nylon gear with the metal center piece installed? I don't have any. I bench tested it and it does work in both directions. I thought I'd check in here before reinstalling everything back in the door. Thanks, Rob McCall '67 LeBaron ----------------- http://www.imperialclub.com ----------------- This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm