RE: IML: Points to Electronic conversion
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: IML: Points to Electronic conversion



Luis,
 
There are many places that sell these kits. Ebay usually has them, as does Mancini and you can also get them direct from Chrysler (Mopar Connections) . They are somewhere between $150.00 to $200.00 depending on who has them. You can get them from the wrecking yards as well, but quite often the ignition box is burnt out. The kits consists of the distributor, electronic ignition box, wire harness and resistor. Very easy to do, as long as you mark your distributor as to which cylinder is firing when you remove it and put it back with the rotor pointing to the same place. Also, note that the distributors are different between the Big Block 'B' or low block and 'RB' or raised block engines. The ones for the 'RB' are about 3/4 inch taller to take into account the increased block height.
 
 
Tom
 
-----Original Message-----
From: mailing-list-owner@xxxxxxxxxxxxxxxx [mailto:mailing-list-owner@xxxxxxxxxxxxxxxx]On Behalf Of louis colon
Sent: Tuesday, March 15, 2005 3:23 PM
To: Luis Colon; Mailing-list@xxxxxxxxxxxxxxxx
Subject: IML: Points to Electronic conversion

Is there anything on this at our site  about this conversion,  if there is I can't find it. Is there a conversion kit I can buy?
 
Thanks Luis


Luis Colon
1968 Blue Convertable,1974 Chysler New Yorker.


Do you Yahoo!?
Yahoo! Small Business - Try our new resources site!

Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.