Elijah,
I am not sure of that particular model, but normally, you do not ground the
motor. The switch does the grounding, so that the positive and negative
(ground) can be reversed to allow the motor the up and down movement.It is a
DC motor, so reversing polarity reverses the direction. It sounds like they
may have the wires to the switch and motors confused somewhat. Ask them what
the motor does if they connect the power directly to the motor wires and
then reverse the leads to the motor wires.
Tom
-----Original Message----- From: mailing-list-owner@xxxxxxxxxxxxxxxx [mailto:mailing-list-owner@xxxxxxxxxxxxxxxx]On Behalf Of Elijah Scott Sent: Wednesday, February 23, 2005 10:33 AM To: Imperial Mailing List Subject: IML: '66 Imperial Electrical Question
Hi Folks,
Yesterday, I spoke on the phone with a repair shop in Texas that is working on a '66 Imperial. The car was evidently in a fire, but the owner is restoring it. I had rebuilt all the power window switches for the car, but the repair shop is still having some problems getting the power windows to work.
As best I can understand the situation from our conversation, the windows will only work when a ground wire is attached to a window motor and run to the body. But when this is done, the window will only go down, not up. The shop has a copy of the schematic from the '66 shop manual, but it appears to be for the Chrysler line, and is not the same as the Imperial wiring.
Anyone have any ideas on this one?
Thanks!
Elijah
===== http://www.imperialclub.com/~imperial71/ http://www.imperialclub.com/~imperial71/bookshelf.htm 1965 Imperial LeBaron 1967 Chrysler Newport Custom Sedan 1970 Imperial LeBaron 1971 Imperial LeBaron
__________________________________ Do you Yahoo!? Yahoo! Sports - Sign up for Fantasy Baseball. http://baseball.fantasysports.yahoo.com/
----------------- http://www.imperialclub.com ----------------- This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
----------------- http://www.imperialclub.com ----------------- This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm