RE: IML: Ride height
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: IML: Ride height



2 ¼ difference inside bushing of lower control arm to flat of lower ball joint, quote from FSM on IML “It's measured as the difference between "lowest point of one of the lower control arm bushing housings to floor" and "from lowest point of flat portion on bottom of lower ball joint on same side."

 

Regards:

Ernie and The Black Bitc_!!

 

 

-----Original Message-----
From: mailing-list-owner@xxxxxxxxxxxxxxxx [mailto:mailing-list-owner@xxxxxxxxxxxxxxxx] On Behalf Of acorn2
Sent: Sunday, November 28, 2004 2:53 PM
To: mailing-list@xxxxxxxxxxxxxxxx
Subject: IML: Ride height

 

I put out a request for the ride height for a 57 Imperial with 15" wheels.  Does anyone know the correct height as I need to know for the weekend.

 

Kind regards

 

K & A



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.