IML: Brake Booster
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
IML: Brake Booster
- From: "Eric" <gearhead@xxxxxxxxxxx>
- Date: Mon, 11 Oct 2004 15:03:28 -0700
Brandt, Looks like you're making good progress. Be sure to check the
listings for brake parts vendors on the website,
http://www.imperialclub.com/Part/Brakes/Resources.htm
You'll see what they specialize in at the bottom of each listing. It looks
like there 2 or 3 shops in California. I can attest to good service at the
Portland, Oregon shop, Power Brake Booster Exchange. "Booster Dewey" as he
is known there, sold me a new booster this summer for my '72 Newport. I
watched him even do an adjustment of the level of assist. I think he could
help you if you cannot find a local supplier.
Keep up the good work.
Eric
'63 Crown Four-Door
'72 Newport Custom sedan
Subject: RE: IML: Brake Booster (1963 Le Baron)
From: "Christopher Middlebrook" <delamothe@xxxxxxxxxx>
Date: Mon, 11 Oct 2004 13:08:42 -0400 (EDT)
Reply-To: mailing-list@xxxxxxxxxxxxxxxx
Looks like a similar path taken by my 62 this summer. Not many people stock
our boosters - that was my epiphany too.
Most places will take your booster and rebuild it which is what I had to do.
Yours sounds very similar to mine which is a Bendix with the 4 bolts for the
master cylinder.
Try these folks. They are very knowledgeable, and they did a super job on my
hisssssssssing boossssssssssssssssster:
Power Brake Booster Exchange
4533 SE Division St
Portland, OR
503 238 8882
Kanter sells a beautiful re-casting of the master cylinder. Might as well
change it too if you're going through all of that trouble to begin with.
And that leads to another super handy tool, the power brake bleeder from
Motive Products. It will save you a lot of time and hassle. And it's worth
every penny of the 60 or so bucks with shipping.
Not that there is anything wrong with a friend or neighbor helping you pump
up the pedal, but when they forget to tighten the master cylinder cover and
then you get brake fluid all over your freshly painted valve cover... Well,
you get my drift.
Have fun!
Chris Middlebrook
62 Custom
--- On Mon 10/11, Brandt Daniels < bdaniels@xxxxxxxxx > wrote:
From: Brandt Daniels [mailto: bdaniels@xxxxxxxxx]
To: mailing-list@xxxxxxxxxxxxxxxx
Date: Mon, 11 Oct 2004 09:00:24 -0700
Subject: IML: Brake Booster (1963 Le Baron)
IML,<br><br>I've removed the booster/master cylinder assembly from the 63 Le
Baron. I need another one because this one went bad. I tried autozone,
theyre out of stock. Pepboys had no idea as usual. Napa wasnt too helpful
either. Then I was up north this weekend in the San Fernando Valley and
stopped at Performance Auto Warehouse (P.A.W.) and they said we do not carry
brake boosters. What a let down from PAW, seeing that they had the hugest
part shelves i'd ever seen. I tried overhauling the booster myself but the
booster I have is not shown in the service manual...only bendix and midland
ross were shown. but the booster I have did not have 8 bolts holding the
vacuum together it was more like one piece with the metal welded together.
so i could not take it apart to get inside. Most of the ones I did get a
chance to look at new had the two-bolt on master cylinder, my master
cylinder requires 4 bolts, its a single cylinder with one brake line for
drum/drum application. Please help me find a replacement that
works.<br><br>Brandt<br>La
----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
Back to the Home of the Forward Look Network