Re: IML: IML DIGEST
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: IML: IML DIGEST
- From: "Dave Grove" <dave@xxxxxxxxxxxxxxxxxxx>
- Date: Sat, 25 Sep 2004 20:09:21 -0400
If the battery is fully charged, it is probably the starter contact. You
might try disconnecting the battery, then loosen the 1/2" (or 9/16") nut
that holds the large cable to the starter stud. Then tighten the stud nut
right at the starter. Sometimes these work loose and will cause the
"click".
If still a no-go, then the contact stuff needs to be replaced. Either that
or the whole starter. Improvements in this area were made on later models
and a current rebuilt model will have them. Ask for part number 3257. A
3258 will also fit, and is a better starter (more HP I believe).
Regards,
DaveG.
----- Original Message -----
From: <PompRocker@xxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Saturday, September 25, 2004 7:44 PM
Subject: Re: IML: IML DIGEST
> My 63 chrysler wont start all i get is a clicking sound when i turn the
> key...whats wrong?
>
----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
Back to the Home of the Forward Look Network