Re: IML: Mounting 440 on engine stand
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IML: Mounting 440 on engine stand



When I got my stand and bought those bolts, I bought higher grade bolts just
as a margin of safety.  Most bolts you get just off the shelf are grade 2
and strip or break easily.  I went with grade 5 or better IIRC.  There's not
many engines heavier than a 440.


Please quote this message in your reply.  Otherwise I will be unable to
reply to your message.  Thanks.



----- Original Message ----- 
From: "David Whitney" <david.whitney@xxxxxxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Friday, September 24, 2004 3:05 AM
Subject: IML: Mounting 440 on engine stand



Hi, folks --

I ventured one step further into knucklebusting by purchasing an engine
stand in anticipation of building the 440 for my engineless project car.
It's the kind with four adjustable plates with bolt holes running through
them.  Since I have no engine, I also have no bolts with which to mount the
block to the stand.  I'm starting with a bare block, so it doesn't come
with any.  Can someone please give me the specs or part number for those
bolts so I can pick up a set?  It's a '65 casting stock block.

Also, will I need to pick up a flex plate or can I run the bolts directly
to the block?  If so, can it be any old flex plate or does it have to be
the one I'll have on there permanently?

Thanks,

David
'91 K-Imperial driver
'66 Crown Coupe project
'66 Newport 383 dual exhaust .030 over Eddys/B&M/Cragars daughter's first
Mopar



-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.