Polyurethane Suspension Parts
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Polyurethane Suspension Parts



Rubber = smooth ride, PU = stiff ride
By the time you need to change the bushings again you
or the car won't be around.
--- Brooks Harkey <vm.dude@xxxxxxxxxxx> wrote:

> Thank you, Dietmar, for explaining to me in another
> thread that "PU" 
> stood for "Polyurethane" when discussing the idler
> arm bushing.  I had 
> been unable to make that leap.
> 
> And that begs another question that I'd like some
> help on.  Are there 
> polyurethane suspension bushings being manufactured
> for Imperials?  And 
> am I sure I want them?  I don't think I do, because
> of my experience in 
> the 4-wheeling hobby (I also have a Jeep CJ7).  In
> the 4-wheeling hobby, 
> we put all polyurethane bushings everywhere in the
> suspension:  leaf 
> spring ends, body mounts, etc. etc.  They are more
> durable than the 
> originals, don't soak up oil and become mushy, don't
> deteriorate over time.
> 
> However, it's also my experience that they ride a
> lot rougher because 
> they are stiffer than the original rubber parts. 
> This is just fine for 
> Jeeping, and I'm sure for Mustangs & Camaros, but I
> don't think I want 
> the ride on my IMPERIAL modified in that direction. 
> I think I would 
> prefer to seek out the rubber parts, over
> polyurethane ("PU" as Dietmar 
> put it, for typing speed.  (:-D))
> 
> It's also been my experience that any car I ever
> owned, once I replaced 
> the front control arm bushings, rode SOOO much
> smoother than it had 
> before.  Now, I've never used polyurethane bushings
> on anything other 
> than the Jeep........ so could anybody report back
> that's used 
> polyurethane bushings on your Imperial and how that
> changed its ride, if 
> at all?  Because I do plan to replace all my rubber
> bushings and I would 
> like to know ahead of time if your Imperial ride was
> affected by using 
> "PU".  I know it would make the handling
> stiffer....... but I'm not 
> after stiffer handling, I'm after smoother ride, but
> I might be all wet 
> on my opinion about the PU bushings.
> 
> Thanks!
> 
> --Brooks in Dallas
> 
> > <http://www.movit.de/htm/imp60hom.htm>
> >
> 



                
__________________________________
Do you Yahoo!?
New and Improved Yahoo! Mail - Send 10MB messages!
http://promotions.yahoo.com/new_mail 



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.