NYB window motor
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

NYB window motor




Would a K car window motor fit a 83 imperial?
Dads 82.
Lawrence R Noska
lnoska@xxxxxxxxxxxx
Hauser, ID 83854

-----Original Message-----
From: mailing-list-owner@xxxxxxxxxxxxxxxx
[mailto:mailing-list-owner@xxxxxxxxxxxxxxxx]On Behalf Of Robert Weldon
Sent: Wednesday, August 04, 2004 9:00 PM
To: mailing-list@xxxxxxxxxxxxxxxx
Subject: Re: IML: 413 starter motor and NYB window motor


----- Original Message -----
From: mOPAR mIKE and mELISSA
To: mailing-list@xxxxxxxxxxxxxxxx
Sent: Wednesday, August 04, 2004 1:02 PM
Subject: IML: 413 starter motor and NYB window motor


Happy Imperial Summer to everyone,
Does anyone out there have a good working spare "starter motor and solenoid"
that they would like to sell, that would fit an early 413 engine ('59-'62)
???. I was going to buy a SUMMIT one, but I thought I would ask the list
first....... and while I'm at it, I guess I also need a working drivers side
"window motor and gear assembly" that will fit a '77 NYB.

If memory serves, Chrysler used the same power window motor assemblies up
into the late eighties.  I know I have found k-cars with identical power
window motors to my 68 Newport.  Just had to change the wiring harness.  You
should be able to visit any junkyard for these cars, there were millions of
them.




Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.