New Edelbrock 1406 Installation../ 3/8 - 5/16

["jsadowski" <jsadowski@xxxxxxx>]

One thing to keep in mind is that the carb nipple requires 3/8 hose but the stock fuel line is 5/16. I have the Carter replacement for my 69 & am facing the same situation. Some have suggested giving the clamp a "couple extra turns" on the 5/16 end. Any thoughts on this?

John

----- Original Message -----

From: Mike Pittinaro

To: mailing-list@xxxxxxxxxxxxxxxx

Sent: Tuesday, March 23, 2004 12:29 PM

Subject: Re: IML: New Edelbrock 1406 Installation..

> I just got my 1406 and was wondering what tips you
> all might have on
> installing it.  Any comment would be appreciated!

Step 1: Remove Holley
Step 2: Set Edelbrock onto manifold
Step 3: attach fuel line using piece of 3/8" rubber
tube from Pep Boys, an inline filter, and some fuel
line clamps from "Help!"
Step 4: Drop kick Holley into nearest garbage
receptacle, or list on ebay for $0.99.
Step 5: enjoy the smoother idle.

=====
--Mike Pittinaro

One point eight litres
Stromberg carburators sing
Loose nut at the wheel

__________________________________
Do you Yahoo!?
Yahoo! Finance Tax Center - File online. File on time.
http://taxes.yahoo.com/filing.html


-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm