power steering hose
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

power steering hose



I was able to locate the 5/8th PS hose at my local NAPA (as I recall they had to order it - 3 ft in the box).  The 5/8th was also used on Mopars up through 66 - I parted out a Dart that used the 5/8ths.  I believe 67 was the first year for the smaller hose.
Don
----- Original Message -----
From: jsadowski
Sent: Monday, March 15, 2004 10:55 PM
Subject: Re: IML: power steering hose

The return hose is 5/8 on the 60's Imperials I have a feeling that is how some folks get the idea to use a length of heater hose, since it fits right on & they know the cooling system gets pretty hot & operates under pressure.
   The problem here is that a heater hose won't stand up to the fluids in the steering & start to slough off from inside & depositing a lot of garbage throughout the system. Generally, by the time you notice something wrong, the damage has been done.
John
----- Original Message -----
From: W Bell
Sent: Monday, March 15, 2004 7:36 PM
Subject: IML: power steering hose

Great comments, RandalPark.  I suspect the return line might be closer to 3/8" rather than 5/8", just my gut suspicion, but I could be wrong.  It's fine to get a length of hose that's a little longer than what you currently have, but not too long.
 
The genuine power steering hose will usually be stiffer and have a different feel and look than fuel line hose.  I suggest that if the auto parts counter person questions that request for power steering spec hose, find someone that knows what you need and are talking about.  Also you might take the old one for size reference.  If you need to, don't forget to install some new hose clamps too and fresh power steering fluid.
 
Enjoy!
W Bell


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.