power steering hose
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

power steering hose



Good point about the length, Bell. I once saw a power steering return hose on a 
'62 Imperial that was wrapped around the auto pilot mechanism. It seemed 
unnecessary until after unwrapping it the hose moved and melted against the 
left exhaust manifold. This caused a catastrophic failure of the system and an 
oil fire under the hood. Oh yes, I believe that it was heater hose as well. 

The owner of that car was me. I am a firm believer that we learn best from our 
own mistakes ;>

Paul

In a message dated 3/15/2004 9:36:31 PM Eastern Standard Time, 
cbody67tx@xxxxxxxxxxxxx writes:

> Great comments, RandalPark.  I suspect the return line might be closer to 
>3/8" rather than 5/8", just my gut suspicion, but I could be wrong.  It's fine 
>to get a length of hose that's a little longer than what you currently have, 
>but not too long.
>  
> The genuine power steering hose will usually be stiffer and have a different 
>feel and look than fuel line hose.  I suggest that if the auto parts counter 
>person questions that request for power steering spec hose, find someone that 
>knows what you need and are talking about.  Also you might take the old one 
>for size reference.  If you need to, don't forget to 
> install some new hose clamps too and fresh power steering fluid.
>  
> Enjoy!
> W Bell



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.