1960 Imperial 413
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

1960 Imperial 413



You shouldn't have too much trouble finding an engine for your car. There are 
probably several available from the sources listed right in our own Imperial 
Club Web site. No matter what, I would think that you should rebuild the motor 
before installing it in your car. Your first drive in the Imperial with a fresh 
motor will make all of this worthwhile.

Paul

In a message dated 3/2/2004 11:11:50 PM Eastern Standard Time, 
thulse@xxxxxxxxxx writes:

> 
> 
> Thanks to everyone who helped find the 413's that will interchange with the
> 1960 of mine. For those who missed it this is what we come up with.
> 1959/1960/1961 will interchange with no major modifications.
> Engine ID #'s 1959 (M413 or ML413), 1960 (P 41), 1961 (R-41).
> 
> Thanks again
> Tim
> -----Original Message-----
> From: mailing-list-owner@xxxxxxxxxxxxxxxx
> [mailto:mailing-list-owner@xxxxxxxxxxxxxxxx]On Behalf Of Bill Watson
> Sent: Tuesday, March 02, 2004 2:58 AM
> To: mailing-list@xxxxxxxxxxxxxxxx
> Subject: Re: IML: 1960 Imperial 413/Interchange???
> 
> 
> 
> 1959 would be M413 or ML413.
> 
> Bill
> Vancouver, BC
> 
> 
> ----- Original Message -----
> From: "Tim Hulse" <thulse@xxxxxxxxxx>
> To: <mailing-list@xxxxxxxxxxxxxxxx>
> Sent: Monday, March 01, 2004 6:27 PM
> Subject: RE: IML: 1960 Imperial 413/Interchange???
> 
> 
> > Paul,
> >  I have found the engine number for 1960 (P 41 ), 1961 (R 41), 1959 I
> cant'
> > find. Can you or  anyone else help me on this?
> >
> > Thanks
> > Tim
> >
> >
> > -----Original Message-----
> > From: mailing-list-owner@xxxxxxxxxxxxxxxx
> > [mailto:mailing-list-owner@xxxxxxxxxxxxxxxx]On Behalf Of
> > RandalPark@xxxxxxx
> > Sent: Monday, March 01, 2004 5:38 PM
> > To: mailing-list@xxxxxxxxxxxxxxxx
> > Subject: Re: IML: 1960 Imperial 413/Interchange???
> >
> >
> > That is correct, but due to the changes in the automatic, only '59, '60,
> and
> > '61 will easily fit your car. I think that you can make the newer years
> > work, but you would have to re-use your crank shaft.
> >
> > Paul
> >
> > In a message dated 3/1/2004 7:46:03 PM Eastern Standard Time,
> > thulse@xxxxxxxxxx writes:
> >
> > > Ok guys,
> > >  I have been checking and reading a lot about the 413's. If I am correct
> > the 1959-1965 Imperials all used the 413. Is
> > > this correct? I have a few leads for good motors.
> > >
> > > Thanks everyone
> > > Tim
> >
> >
> 
> 
> 


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.