automatic Parking brake release question
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

automatic Parking brake release question



On my '67, when you shift into drive the parking brake releases.  Of course,
don't use it much in the flatlands of the Arkansas delta.

----- Original Message ----- 
From: "imperialman" <imperialman@xxxxxxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Saturday, December 13, 2003 2:00 PM
Subject: Re: IML: automatic Parking brake release question


> Would this also apply to the Automatic Parking Brake release on a 67?.
> Though it isn't a huge problem ,the parking brake has never worked on my
> Crown Coupe.
> It plain doesn't do anything.  The pedal won't even stay down when you
press
> on it. It has also never made any sort of vacuum hissing noise. I always
> thought it was a gizmo ,or bracket of some sort built out of  unotainum
that
> had to be replaced.
>  By contrast the old release it yourself ,parking brake on my 60 Custom
> works like gangbusters!.
>                 Clay Smith
>              67 Crown Coupe
>              60 Custom
>
>
>
> ----- Original Message ----- 
> From: "Dick Benjamin"
>
> > Take a look at the vacuum diaphragm device on the left kick panel, the
one
> > that is connected to the brake release.  See if the vacuum hose is
> connected
> > to it, and to the control valve on the base of the steering column.   If
> > not, there must be a stub of a hose or some other device to prevent
vacuum
> > leaking from the control valve, otherwise you'd hear a lot of vacuum
> hissing
> > under there when you shifted into gear.  I'm assuming you don't, and
that
> > your backup lights work.  If this is correct, the release device is
either
> > disconnected or failed in such a way that it doesn't leak (it is rare
that
> > they fail in that mode, usually the failure is that they begin to leak,
> and
> > the owner disconnects them).
> >
> > Dick Benjamin
>
> > >
> > >
> > > -----------------  http://www.imperialclub.com  -----------------
> > > This message was sent to you by the Imperial Mailing List. Please
> > > reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
> > > shared with everyone. Private messages (and attachments) for the
> > > Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
> > > To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
> > >
> > >
> > >
> >
> >
> >


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.