Re: FW: IML: 56 Imperial is there another engine other than a Hemi head
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: FW: IML: 56 Imperial is there another engine other than a Hemi head ??



>From what I have been told, the Hemi heads will NOT work on the Poly block. 
>For one thing, I think that the pushrods are at way different angles in each 
>engine. I have had three Hemi engines apart, but I haven't ever seen the 
>"lesser" engine disassembled. The pistons are not "domed" in the 331 or 354 
>Hemi engines.

Paul

In a message dated 12/3/2003 4:15:38 PM Eastern Standard Time, 
hilljack7@xxxxxxxxxxxxx writes:

>  
> The information I had is while the blocks are the same, the pistons are 
>different and would have to be changed, possibly the rods too. The Poly piston 
>is supposed to be a typical flat top piston.
> I'll be tearing my own down personally, but I haven't quite gotten to that 
>project yet.
>  
> Phil
> ----- Original Message ----- 
> From: mENTAL mAN 
> To: mailing-list@xxxxxxxxxxxxxxxx 
> Sent: Wednesday, December 03, 2003 3:06 PM
> Subject: RE: FW: IML: 56 Imperial is there another engine other than a Hemi 
>head ??
> 
> 
> GREAT QUESTION !!
> I am curious if the "hemi" heads will WORK on a "poly" head block ????
> I've seen a "hemi" piston with the rounded top, but what 
> does the "poly" piston look like ??



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.