The air cleaner hold down rod is 1/4-20 thread - you can buy "all thread" rod at the hardware store and cut it to length. Its diameter is 1/4 inch. The choke hookup for the Holley may be different for that of the AVS or AFB - but if you buy the new carburetor, it will come with electric choke assist, which is better than the original, and very easy to connect - it simply goes to the "I" terminal of the ignition switch. Dick Benjamin ----- Original Message ----- From: "Robin Giesbrecht" <robings@xxxxxxxxxxx> To: <mailing-list@xxxxxxxxxxxxxxxx> Sent: Thursday, March 06, 2003 9:06 AM Subject: Re: IML: Carburetor Problem > The only thing you should need is the air cleaner rod as the Holley one is > too short. I just made one with some threaded rod 1/8". You will also have > to make a different steel fuel line feeding the carb but that is easy. Have > to flare one end and reuse the fitting from the Holley. > > Robin Giesbrecht > 1872 Imperial > > > > > > > >From: "Rob P" <fristpenny@xxxxxxxxxxx> > >Reply-To: mailing-list@xxxxxxxxxxxxxxxx > >To: mailing-list@xxxxxxxxxxxxxxxx > >Subject: Re: IML: Carburetor Problem > >Date: Thu, 06 Mar 2003 11:07:51 -0500 > > > > > >>The Edelbrock site offered up the following options for the retrofit > >>carburetor: > >> > >>1407 Performer Series; Carburetor; 750cfm; Square-Flange; Manual Choke; > >>w/o EGR; "Universal Fit" > >>1411 Performer Series; Carburetor; 750cfm; Square-Flange; Electric Choke; > >>w/o EGR; "Universal Fit" > >> > >>As I haven't seen any wires attached to the Holly, I'm guessing that the > >>manual choke option is what I'm looking for. > >> > >>Also offered were these items which I don't think I need but possibly may: > >> > >>Carburetor Stud > >>Carburetor Throttle Kicker > >>Carburetor Throttle Lever Extension > >>Kickdown Linkage > >> > >>Does this sound correct? > >> > >>EdH > >>'68 Crown Coupe > > > >I would definitely go for the electric choke. Manual choke would mean you > >have to run a cable for the manual choke through to the interior. An > >electric choke saves a lot of headaches and I think it eliminates some of > >the linkage problems of the stock ones. You may need some of the other > >items. I think they sell them as a kit to install in a Mopar. > >Rob > >Still happily using champions > > > >_________________________________________________________________ > >MSN 8 with e-mail virus protection service: 2 months FREE* > >http://join.msn.com/?page=features/virus > > > > > >