'67 Imp with a '68 nose
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

'67 Imp with a '68 nose



Thank you very much for the info!!!  My dad and I went out to the car and got under it to check everything out and make sure the frame and suspension was sound and found good news:  its all straight and unharmed.  I found out that the first owner's wife had "bumped" the grill and fender and the body shop used what they could get to repair the car.  I was very happy to find out that the damage had only been cosmetic.  After thinking about it for a while I decided that I liked the 68 front clip on the 67, it gives the car character,lol.  I'm sending the heads in to get them reworked next weekend and I will be back on the road with my 1/2 67 Imperial in two weeks. 
 
                                                                Thanks again,
                                                                        Eddie V.
----- Original Message -----
Sent: Monday, January 20, 2003 10:37 PM
Subject: Re: IML: '67 Imp with a '68 nose

It could be that 68 parts were readily available when repair time came.. The blessed internet..was not always so useful and available to us.  People probably used what they could find and was expedient. Not such a sin....ask Brad about his Newporker!
 
----- Original Message -----
From: Christopher Hoffman
Sent: Monday, January 20, 2003 11:16 PM
To: mailing-list@xxxxxxxxxxxxxxxx
Subject: Re: IML: '67 Imp with a '68 nose
 
Welcome, Edmund...

Since some of the follow-ups to this didn't seem to note the magnitude of
Dick's statement, you'd need to swap out the entire front end of the car,
except for the hood (I'm talking bodywork only here, of course).

The front fenders do not interchange between '67 and '68. The bottom edge of
the '68 fender goes straight across from the front wheel arch to the bottom
of the grille, whereas the '67 fender dips down to accommodate the "J" shape
of the wraparound bumper.

As far as front-end bodywork goes, only the hoods interchange. And even so,
the '67 has a hole for a stand-up eagle medallion (the actual medallion, not
the mid-80s AMC-Renault car) and the '68 windsplit extends down the front
edge of the hood.

Sounds like someone put the front clip of a '68 on this '67... as Dick
noted, the most obvious reason to do this is to repair a wrecked front end,
so a thorough check of the mechanical stuff underneath the mismatched
bodywork would be worthwhile.

For now, consider your car unique!

Chris in LA
67 Crown
78 NYB Salon

Dick Benjamin (DickB@xxxxxxxxx) wrote:
> It is a simple bolt-on job to replace the front end sheetmetal of a 67 with
> 68 equivalents, the only problem being that the side trim is different, and
> you will have side marker lights in the front and not in the back.



-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.