IML - DIGEST POSTING

["DanT" <dplysedan@xxxxxxxxxxx>]

What model Ram was that? I had a 96 club cab long bed and it had 16.5 rims
on it right from the factory. They were 8 lug
----- Original Message -----
From: "Mark Swingle" <mswing11@xxxxxxxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Friday, January 03, 2003 5:21 PM
Subject: RE: IML: IML - DIGEST POSTING


> The full size vans and trucks switched to this bolt pattern around 1985.
I
> think they still use it.  My 96 Ram 1500 had 16" wheels with the same
> pattern, but the heavier trucks had 8 lugs.  I'd look for truck or van
> wheels if you need larger than 15's.
>
> Mark
> 1990 Chrysler Imperial
> 1991 Plymouth Grand Voyager LE
> 1994 Chrysler LeBaron LX convertible
> 1997 Dodge Neon Highline sedan
> Atlanta, GA
>
> -----Original Message-----
> From: mailing-list-owner@xxxxxxxxxxxxxxxx
> [mailto:mailing-list-owner@xxxxxxxxxxxxxxxx]On Behalf Of Jim Gathmann
> Sent: Thursday, January 02, 2003 11:34 PM
> To: mailing-list@xxxxxxxxxxxxxxxx
> Subject: RE: IML: IML - DIGEST POSTING
>
>
> If the '92 Mopar van wheels work, you can also get
> away with any other FWD mopar's wheels with the 5-bolt
> pattern- as all of the FWD true Mopars (aka 80's-early
> 90's) use the same bolt pattern, reguardless if they
> are 13", 14", or 15". I also know some of the 15"
> option packages included alloy rims....
> --- Tristan Moore <v-2tmoor@xxxxxxxxxxxxxxxxxxxxxxx>
> wrote:
> >
> > Hi Phil
> >
> > The 92 Dodge van angle sounds VERY interesting! Let
> > me know if the wheels
> > actually fit, because that might be a solution. I'm
> > supprised no one has
> > solved this issue once and for all a long time ago.
> > People have been asking
> > about wheel interchanges on here for a couple of
> > years :-)
> >
> > Cheers
> >
> > Tristan
> >
> >
> > From: "Phil Patterson" <hilljack7@xxxxxxxxxxxxx>
> > Subject: Alternate rims for Imperials, was Re: IML:
> > IML - DIGEST POSTING
> > Date: Thu, 2 Jan 2003 21:13:28 -0500
> > Reply-To: mailing-list@xxxxxxxxxxxxxxxx
> > >Hey Tristan, I have a 92 Dodge van with the special
> > factory mag wheels.
> > >Since I have the hub off of my 68 Imp at the
> > moment, it shouldn't be hard
> > >to
> > >check the bolt pattern. It looks pretty close,
> > supposed to be the same as
> > >the Ford with the same pattern. Finally, I kind of
> > like the wheels on my
> > >van, I may keep them and make Imperial caps for
> > them, just for grins. If
> > the
> > >weather holds up, I'll take some pics tomorrow if
> > things work out on a test
> > >fitting.
> > >Phil <><
> >
> >
> >