83 EFI answers
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

83 EFI answers



Leo,
 
Be brave pull them out and have a look at them, there is an o ring
that locates them around the bottom of the valve. Without any o rings the fuel
would flow around the valves instead of through the valves once the spring
tension has been overcome. When you get the valves out you will notice that
one valve is harder to compress than the other.
 
Neil Thorpe 82 Imp
----- Original Message -----
Sent: Thursday, January 02, 2003 3:01 AM
Subject: Re: IML: 83 EFI answers
Neil,
Should those two valves have an o ring around the top of them?. There is a groove around them near the top that looks like it should have an o ring. If they are supposed to, mine never had them! I assume the valves must have an o ring farther down because they act like they are stuck. I can move them from side ti side but not up and out.
Leo


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.