I believe the 63 doors will fit the 60. However, the glass
DOES NOT. The side glass is the same from 60-62. The 63 is one year only. I
believe you can swap the glass & all the runs to make it work.
John
----- Original Message -----
Sent: Thursday, December 12, 2002 9:50
AM
Subject: Re: IML: Re:1957-63 Rear door
removal Q? on 4d cars
I ground out the rivet and the door came off. I'll be
sure to try to match up my current doors onto the 63 (I'm trading him)
before driving off with a stupid grin on my face.
-Thanks to all
that responded!
-Kenyon
--- Jeff Ingraham <jeff_ingraham@xxxxxxxxx>
wrote: > Hi Kenyon, > We had a
heck of a time with the doors on my 57 and my brothers 58 > and >
swapping with the doors off the 59 burned up parts car. Anyway we
found > the > rear doors off a 59 4dr LOOK identical to the 57 or
58 (all 4dr HT FYI) > but > they have a different internal contour
and WILL NOT WORK which was not > evident > until we had the 59
door mounted on the 57 and went to shut it. YIKES! > The only
reason I mention this is if you current doors are soon to be >
smashed > into oblivion, it would be best to find out if they don't work
before > they are > destroyed. And they may be the
same as I have never swapped 60/63 > doors, I > just wanted to
relate that story as it came as quite a shock to me when > we >
suddenly had to find another door and they looked identical! > Now about
the slider bar that limits door mobility.. > We fought and fought with
that and ended up drilling out the rivit. > Perhaps > Bob
Hoffmeister or some other parts vendor type can add their tips but >
we > fought for hours and ended up drilling the rivit out. > Good
luck! > Jeff > > > kenyon wills wrote: >
> > I am hurrying to remove my 1960 rear doors. The 1963
demo derby guy > is > > letting me swap my rusty doors for his
perfect ones (!!!). I need to > have > > them out by AM
Thursday and already have them stripped and ready to > pull > >
off. The fronts are already done. > > > > Once I get
all the bolts and such off and tug on the door, the slider > bar >
> that limits the door from opening wider than it should remains.
This > is > > on a pivot that is secured with a rivet and goes
through the door > frame on > > the B pillar and passes through
a piece that is bolted into the > interior > > of the
door. There is a bumpstop on the end that does not appear >
> removable. > > > > Unbolting everything does not
work. > > The FSM does not address door removal, just
adjustment. > > > > It appears that the round rubber
bumpstop has to come off, but there > is no > > apparent way to
do so, and I'm suspecting that the rivet was the last > part >
> insterted. It would be cleanest to remove just that, and easiest
to > > assemble if that were the only thing to press into place and
then > clamp > > down when this was assembled. >
> > > Is there a way to do this without going after the
rivet? > > > > I will slice this thing out if I don't see an
answer Wed night, as I > have > > a second car for parts, but
I'm stumped and will need to address this > one > > way or
another. > > > > Been there? > > Done that? >
> > > How? > > > > ===== > > Kenyon
Wills > > 6o LeBaron - America's Most Carefully Built Car >
> 73 LeBaron - Long Low & Luxurious > > > > San
Lorenzo/SF Bay Area > > > >
__________________________________________________ > > Do you
Yahoo!? > > Yahoo! Mail Plus - Powerful. Affordable. Sign up
now. > > http://mailplus.yahoo.com >
> > > ----------------- http://www.imperialclub.com
----------------- > > This message was sent to you by the Imperial
Mailing List. Please > > reply to mailing-list@xxxxxxxxxxxxxxxx
and your response will be > > shared with everyone. Private messages
(and attachments) for the > > Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx >
> To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm >
> > > ----------------- http://www.imperialclub.com
----------------- > This message was sent to you by the Imperial Mailing
List. Please > reply to mailing-list@xxxxxxxxxxxxxxxx
and your response will be > shared with everyone. Private messages (and
attachments) for the > Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx >
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm >
===== Kenyon Wills 6o LeBaron - America's Most Carefully
Built Car 73 LeBaron - Long Low & Luxurious
San Lorenzo/SF Bay
Area
__________________________________________________ Do you
Yahoo!? Yahoo! Mail Plus - Powerful. Affordable. Sign up now. http://mailplus.yahoo.com
-----------------
http://www.imperialclub.com
----------------- This message was sent to you by the Imperial Mailing
List. Please reply to mailing-list@xxxxxxxxxxxxxxxx
and your response will be shared with everyone. Private messages (and
attachments) for the Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx To
UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
|