metal interaction question
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

metal interaction question



Dissimilar metals for the most part have a reaction.  Some are just more notable than others.  I didn't think Stainless steel had much reaction with aluminum, although regular carbon steels sure do.  Usually stainless is pretty benign and unreactive.  Pot metal doesn't seem to react much with regular steel, as evidenced by the fact that you can get your fasteners out of there, usually, and you rarely find problems on the body panels where it is mounted. Pot metal does suffer from weather and salt.
     I think you are pretty safe using stainless fastners with aluminum, but you must be certain that the gasket between the aluminum and the steel parts like fenders and headlight pots is properly positioned and in good shape.    
John 
----- Original Message -----
From: bom tie
Sent: Friday, September 13, 2002 10:13 PM
Subject: IML: metal interaction question



I am going through one of my cars now, as I remove parts and restore them I am replacing bolts and nuts with stainless when I can do so. I know that aluminum and stainless react and "rust" when they are left in contact. How about pot metal? How about nuts and screws on the carb (zinc magnesium)?
Thanks,
Charles
28 PLY
31 Cm6
62 NY
63 IMP
78 NYB


Changed your e-mail? Keep your contacts! Use this free e-mail change of address service from Return Path. Register now!


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.