You've got a problem in the master switch, or the wiring to it. If the
windows move without operating the switch, obviously, 12 volts is getting to
the wires to the motor, and this should not happen if you are not operating
the switch. Take your wiring diagram and a test light or VOM and figure out
where things are going wrong. Be sure to disconnect the battery
immediately, since you might have a fire if there are some wrong
connections. You can unplug the motor wires while you troubleshoot, this
will prevent burning up the motors.
Dick Benjamin
----- Original Message -----
From: Robert Hanekamp <bobsmopar@xxxxxxxxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Sunday, May 19, 2002 8:11 PM
Subject: IML: power windows
> Hi All.
> While working on my 68 imperial tonight I ran into another problem.
> I have put all the windows back in and hooked them up.
> I can only get the power vent windows and the right rear window to work.
> The front windows when I plugged in the wires to the motors the windows
came
> down on there own and will not go back up.
> I can unplug the motors and use a battery and the windows will work.
> Any help would be great July 12th is getting close.
> Thank you.
> Bob
>
>
>
Back to the Home of the Forward Look Network