Seat bottoms are not the same where the edge touches the carpet. Had that experience, too. the hump going down the center of the passenger compartment is wider on the convertible to accommodate the X frame with enough wiggle room for the dual exhaust pipes to go through--so floor pan is different. The cut out that fits over the hump for a coupe is too narrow. I didn't realize this and so my seat doesn't fit perfectly. However, coupe lower seat is the same width. I remember now since the seat I used for the bottom part is from a coupe, hence the problem with the floor pan differences. Cheers, Henry ----- Original Message ----- From: <Oneof514@xxxxxxx> To: <mailing-list@xxxxxxxxxxxxxxxx> Sent: Thursday, February 21, 2002 4:23 PM Subject: Re: IML: rear seats > The 4 dr seats are wider than the coupes and convertibles, so they won't > interchange. > > I believe that the convertible and coupe seats are the same width, and that > the seat backs are identical. The rear seat sits more forward in the > convertible, vs. the coupe, so there is a difference in the front edge of the > seat bottom, where it meets the carpet. However, I think the coupe seat > could be modified to work in the convertible. > > Wayne 66 conv > >