3m plastic and emblem adhesive

[mopar2@xxxxxxxxxx]

I don't agree. I lived in Rhode Island untill a little under 2 years ago & it
gets plenty cold back there. I'm more afraid that the heat out here will be
more of a problem.
John

Robert Dervin wrote:

> The 3M product is fine unless you live in a cold climate. It has a tendancy
> to contract in the cold and the emblems will fall off.
>
> >From: mopar2@xxxxxxxxxx
> >Reply-To: mailing-list@xxxxxxxxxxxxxxxx
> >To: mailing-list@xxxxxxxxxxxxxxxx
> >Subject: Re: IML: 3m plastic and emblem adhesive
> >Date: Mon, 18 Feb 2002 19:26:15 -0700
> >
> >This is a good product. I used it to mount those pesky eyebrow medallions
> >on my
> >60 & they've managed to stay on for the past 8 or 9 years.
> >John
> >
> >mike sutton wrote:
> >
> > > Hi all
> > >
> > > Im sure an epoxy would be fine for that application that was mentioned
> > > earlier, you may also want to consider the 3M brand product " Plastic
> >and
> > > Emblem Adhesive "...its clear and sets up fairly fast, but if you ever
> >want
> > > to remove the item later, this stuff has the advantage of letting you
> >take
> > > things back off NON DESTRUCTIVELY :)
> > >
> > > Mikey
> > > 62 Crown Coupe
> > >
> > > -----------------  http://www.imperialclub.com  -----------------
> > > This message was sent to you by the Imperial Mailing List. Please
> > > reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
> > > shared with everyone. Private messages (and attachments) for the
> > > Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
> > > To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
> >
> >
> >