Re: IML: What is the best oil to use in a 100,000 mile '59 413 ?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IML: What is the best oil to use in a 100,000 mile '59 413 ?



a friend of mine who belongs to a different car club just got an article on engine oil. It has changed and will wear out an old engine due to the way  it is made. Shell Rotunda (I'm not sure of the spelling) still has the old properties. I will try and get a copy to post.
Zub
----- Original Message -----
Sent: Tuesday, June 05, 2007 9:22 PM
Subject: IML: What is the best oil to use in a 100,000 mile '59 413 ?

Steve;
I suspect that the oil is not your problem, but the old gas.  Stuck lifters shouldn't cause the pushrods to bend.  Modern fuel turns to varnish all too quickly and that gums up the pushrods, causing them to seize and bend.  As most of my Mopars have Carter carbs that tend to dry out after sitting for only a few days, I prime the carbs with a mixture of B-12 Chemtool and Marvel Mystery Oil.  It takes less cranking to bring them to life, and has reduced the number of bent pushrods I've had to replace.  The problem is pretty severe here in the hot desert climate.  If you store your car for any length of time, leave a minimum of fuel in the tank and add fresh gas when you first fire her up.
Cheers,
Roger
Phoenix, AZ


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.