Re: IML: 66 imperial camshaft/lifters
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IML: 66 imperial camshaft/lifters



Marty

The replies are correct on where you can find the engine rebuild parts at 
NAPA or the such.

In our area you can give the short block to a machine shop to get the work 
done for around $900 to a $1000.

Many owners make a mistake at this point and want to switch out the cam for 
better performance.  If you lean to this idea, use only an RV style of cam due 
to the weight of the car.

                                       Rodger & Gabby
                                       Colo Spgs

'47 De Soto Custom w/Fluid Drive & passenger door mounted swamp cooler
'62 Crown Coupe w/std A/C & Auto-Pilot
'66 Le Baron w/dual A/C & reverbed AM/FM
'70 Overlander - InterNational Dbl
'70 W100 w/318, NP 4 Spd, 3:55 & Short Box
'77 D150 w/360, NP 4 Spd, 12 Bolt Axle, OEM Buckets & etc


-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.