RE: IML: hidden stereo
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: IML: hidden stereo



I'm only using two speakers - one in front on one in the rear





From: jsadowski@xxxxxxx
To: mailing-list@xxxxxxxxxxxxxxxx
Subject: Re: IML: hidden stereo
Date: Sat, 2 Sep 2006 22:48:18 -0700

If you wire them all together, you won't be able to get left & right balance or front to rear fade.  You need to run a set of positive & negative to each of the 4 speakers. The instructions with the stereo should tell you which wires go to which speaker.
John
----- Original Message -----
From: JAY D'ANGELO
To: mailing-list@xxxxxxxxxxxxxxxx
Sent: Saturday, September 02, 2006 10:28 PM
Subject: IML: hidden stereo

OK audiophiles - this will be easy for you:
 
I'm hiding a new stereo under the dash, but I'm only using the front and rear speakers.  How do I wire them, since there are four speaker wire runs?
 
Connect both front pos leads together and then to the speaker and the same with the output leads from the rear and connect the negs togethe?  If I do that, then I will have fade control.  Sound right?  been a long time since I've played with speaker wires.
 
Jay D'Angelo
64 Iml Cvt
Las Vegas


Check the weather nationwide with MSN Search Try it now!


Use Messenger to talk to your IM friends, even those on Yahoo! Talk now!

Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.