Hi Greg! .....If your's is like the one on the Imperial I changed MANY!!! years back, it is, in fact a screw-in plug that takes a Allen Wrench. Don't remember exactly what size, maybe a 1/4 or 3/8 but...one of the exterts will probably add their email with the exact size! Pretty straightforward to remove, just be sure you have as much gas removed as possible....it gets HEAVY otherwise!!!!. Also, the removing of the straps to drop the tank was a real joy! ....If you can get new ones and maybe a new set ofstraps, these will make things MUCH easier when you put that puppy back into the car! Good Luck! Dan Melnik ---- gpagency@xxxxxxx wrote: ============= I hope this doesn't sound to stupid but I am replacing my gas tank and I am not sure how to remove the gas tank drain plug. I am assuming it is the metal round plug at the front end of the tank. I can't tell if it unscrews or you pry it out. It has a hole in the middle of it that sort of looks like an allen wrench may go in it but nothing I had fit. How do I remove it? Greg 64 conv ________________________________________________________________________ Check out AOL.com today. Breaking news, video search, pictures, email and IM. All on demand. Always Free. ----------------- http://www.imperialclub.com ----------------- This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm