Some scavenged work?????a few inserts and an Address.
View Full Version : 440 to auto OD
Scouter12-08-2001, 05:53 PM
I have a 440 and want to use a 518 or 618 behind it. Anyone have any info on which unit to use and how to mate it to a big block?
txs12-09-2001, 07:05 AM
They never made a 518-618 for the b motors, get a 618 from a v-10 pre electronic shift and use a cvx (I think) adapter.
hy_desert_4wheeler12-09-2001, 11:37 AM
I dont know anything about the 618 but I would use the 518 with an adapter. I forgot the name of the company that makes the adapter but I believe it is "Roberts something"not real sure though.with the 518 you will neet to run two wires to activate the OD. The first needs to be hot with the ignition switch on the second will be a ground through a switch on the dash to activate the OD.
txs12-09-2001, 09:48 PM
618 is heavier duty, has steel 5 pinion front carrier, 5 pinion OD carrier, more clutches in the OD unit, double wrap L&R band. It only comes in one bellhousing pattern, the v-10 - cummins.
Scouter12-10-2001, 07:57 AM
I have seached and searched but can't a company that makes a bellhousing adapter to mate it up to a big block. Does anyone know the name of a company that makes the adapter?
txs12-10-2001, 09:23 PM
JVX is the name of one of the companies that makes adapters, better get the ky jelly out!
JVX/Memphis Performance 1458 Chealse Ave. Memphis, Tenn (901)274-7248 John Vinson
Mopar Specialist: Yes
Recommended by: Have Not Had Service Here
Recommended Personal Experience with Vendor: Echo?s from Patron?s??..Thumbs Up !
Comments about the Shop: None
I have had No Work done here. Some of the work read about has included carb rebuilding, shift kit
installation, front suspension rebuilding, header installation, and includes much more because he breathes
Mopars. His daughter is racing his old 440 powered Duster that he raced. It is called the Warp Factor. It by
the way does a 10 second Quarter mile.
About The Person Who Recommends This Repair Shop
Name: Paul T. Knisely
E-mail: THESTOCKSGUY@xxxxxxxxxxx
Location: Washington State
Affiliated with this Shop: No
????and never forget Vanishing Point?????
From: SREYDRD@xxxxxxx
Reply-To: mailing-list@xxxxxxxxxxxxxxxx
To: mailing-list@xxxxxxxxxxxxxxxx
Subject: Re: IML: ...jvx trans adapter
Date: Sun, 25 Jun 2006 18:31:53 EDT
hi paul,how do you get one of these jvx trans adapters. i have never hear of one for a big block. Can you send me more info on this please.ThanksRuss