RE: IML: PN for voltage regulator and Carburator.
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: IML: PN for voltage regulator and Carburator.



I replaced the little Holley on my 67 with the Edelbrock. I don't have the model number handy, but there are a some autoparts chains that carry them. Schucks comes to mind. I do know the one I put on is a 750 vs the Holley which, I believe, was a 570cfm. But like someone on the list said quite a while back, you can walk out of the parts store with a new edelbrock and make the swap in the parking lot and drive away in a car running a whole lot better. I got mine new in the box from a relative, but that is about what it amounted to. Basically pulled the old one off dropped the new one on, made sure the mixture screws were set by the instructions, and away it went. Amazing. Actually, now that I think about it, I had to go to the hardware store and by a few cents worth of washers and I can't remember what else. It was fairly easy to figure out. The linkage for the old 3667 Holley didn't quite mate up with the Edelbrock, but it was a fairly easy fix. Seems like I used a long machine screw and a couple of washers on the carb side of the throttle linkage to hook up with the car side. Don't know exactly what carb you have but maybe it's different and will mate up better. The Holley definitely wasn't worth messing with. I dumped a bunch of money into it to have it professionally rebuilt and that was a waste.


Dave 67 Haze Green Sedan Covington, WA





From: louis colon <luis10241@xxxxxxxxx>
Reply-To: mailing-list@xxxxxxxxxxxxxxxx
To: Luis Colon <luis1024@xxxxxxxxx>, "Mailing-list@xxxxxxxxxxxxxxxx" <Mailing-list@xxxxxxxxxxxxxxxx>
Subject: IML: PN for voltage regulator and Carburator.
Date: Tue, 2 May 2006 13:02:20 -0700 (PDT)


Hi List,

I have 68 convertable and I need the part #. I looked on the web site and it has different kinds. The one I have you are able to adjust the voltage, one plug and a oval/round condenser on top. The PN is VR32 but when I look it up in rockauto parts it comes up with 10 different ones.
I am having problems with my holly which I finally got started and I must change. I believed you guys on the list said we could change it to a Edilerock or a Carter? Where could I get one?


Thanks for you help in advance


Luis.



Luis Colon 1968 Blue Convertable,1974 Chysler New Yorker.

---------------------------------
Yahoo! Messenger with Voice. PC-to-Phone calls for ridiculously low rates.




----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm




Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.