|
Is that the one where you
install a bolt in a threaded boss in front of the rod, and use it to 'pin' the
bolt in place while you remove or attach the fuel pump?
David C. Wilker Jr.
USAF (RET)
I have an inferiority complex, but its not a very good one.
----- Original Message -----
Sent: Sunday, March 19, 2006 8:41
AM
Subject: Re: IML: fuel pump questions
62-63
This should be the same as the 383, 440..... fuel pump which
has a rod between the pump arm and the cam. You must make sure that the rod is
pushed in against the cam while installing the pump.
-----
Original Message -----
From: "bom tie"
To: mailing-list@xxxxxxxxxxxxxxxx
Subject:
IML: fuel pump questions 62-63
Date: Sun, 19 Mar 2006 08:45:23 -0500
(EST)
Are thr pumps the same from 62-63 in all chrysler
413s?
The pump has an arm on it, what does this
contact? the shaft or
does a rod go between the
arm and the
shaft?
_______________________________________________
Join
Excite! - http://www.excite.com
The most personalized portal on the
Web!
----------------- http://www.imperialclub.com
-----------------
This message was sent to you by the Imperial Mailing
List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response
will be
shared with everyone. Private messages (and attachments) for
the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To
UN-SUBSCRIBE, go to
http://imperialclub.com/unsubscribe.htm
Fred Joslin
|
