Re: IML: fuel pump questions 62-63
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IML: fuel pump questions 62-63



This should be the same as the 383, 440..... fuel pump which has a rod between the pump arm and the cam. You must make sure that the rod is pushed in against the cam while installing the pump.

----- Original Message -----
From: "bom tie"
To: mailing-list@xxxxxxxxxxxxxxxx
Subject: IML: fuel pump questions 62-63
Date: Sun, 19 Mar 2006 08:45:23 -0500 (EST)




Are thr pumps the same from 62-63 in all chrysler 413s?
The pump has an arm on it, what does this
contact? the shaft or does a rod go between the
arm and the shaft?

_______________________________________________
Join Excite! - http://www.excite.com
The most personalized portal on the Web!




----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm


Fred Joslin



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.